While the weather in Naples may seem pleasant during this phase of winter, it is important to remember that this cooler weather won’t last forever. In fact, Florida is renowned for its wonderfully warm spring and summer weather, but there are times when you need to be indoors. This can actually present a problem because many buildings are designed to restrict the movement of temperature and will trap the excess heat inside. You can try to eliminate much of this problem through the use of fans and ventilation, however, without an influx of cooler air the building temperature will not lower much. This leaves you with the alternative option of hiring Air Conditioning Contractors in Naples FL.
The typical Air Conditioner in Naples is a central air system or an HVAC (Heating, Ventilation and Air Conditioning) system. The two are very similar in design. In fact, the HVAC is actually an extended central air system combined with a furnace. Of course, this description simplifies the explanation a bit. The central air or HVAC system is generally located as close to the center of the building as possible, usually in the attic. This allows for the installation of air ducts that channel the treated air to various rooms. A central location can make this installation easier, but its most important function is to keep the air at the same temperature during distribution. Shorter ducts make this possible by limiting the distance the air must move. An alternative to the large air ducts are high velocity ducts. These are approximately two inch diameter pipes that carry treated air through walls, ceilings or floors.
Another excellent cooling system is the split or ductless AC. This system, like the central air or HVAC, uses an external condenser for compressing a refrigerant. However, the refrigerant is then pumped inside the home through small pipes to a series of room coolers. These are kind of like the front end of a portable AC. They have an evaporator coil, a blower and thermostatic control that helps the homeowner adjust the temperature for the specific space. This allows you to use the AC only where required or limit its use in areas where it isn’t needed at the time.
