Pressure washing is a method of cleaning using a pressurized water spray that rids the dirt and debris. It is great in removing any old paint, mold and stuck on grime from the outside of a house. Following is a quick tutorial on how a house is a pressure washed clean.
Use the Right Machine
Choosing the right machine for the house to be pressure washed is a top priority. The pounds per square inch, or PSI, must be correct. Also, the gallons per minute, GPI, must be determined as well. These two calculations will give you the cleaning power of the pressure washing machine. If you need pressure washing in Chicago for your house, contact a licensed company to help you figure out what machine requirements are needed to clean your home.
In addition to the correct PSI and GPI, the nozzles used and using a gas or electric machine can make a big difference.
Survey the Area
The area surrounding your home must be inspected for any electrical components and wiring. The space around your home will be sure to get wet as well and eliminating any electrocution possibilities is important. Beware of power lines overhead as well; this can pose a deadly risk if handled incorrectly.
Prepare the Home
If at all possible, the home should be scrubbed of any loose and reachable debris. Once complete, anything that is susceptible to damage should be covered with plastic or tarp.
Pressure Washing
Standing strong, the pressure washer can be turned on, and cleaning can start. The water should come out strong enough to remove any mold or dirt, but not too strong to start removing the exterior paint. Adjusting the pressure may be necessary for the beginning to get the correct power.
The wash should start from the top of the house and work its way down. If using a detergent, the exterior would need to be sprayed again with clean water to remove any soap mixture.
If you are pressure washing in Chicago and need help determining your pressure washing needs, contact Prime Business Name.
